Refresh your brake calipers with the E-TECH Brake Caliper Paint Kit. This easy-to-use, one-part paint needs no hardener mixing or primer and gives calipers and wheel hubs a durable, high-quality finish. Choose from 19 colours, with a gloss finish except for Matt Red and Matt Black.
Features
- Heat rated to 220°C.
- Resists corrosion, brake dust, cleaning chemicals, road salt and oil.
- Brush-on application without dismantling the calipers.
- Lead-free formula with a long-lasting finish.
- Resealable tin for later touch-ups and repairs.
What's included
- 1 × 500ml E-TECH Brake Cleaner Aerosol.
- 1 × paint brush.
- 1 × 250ml tin of E-TECH Caliper Paint in your selected colour.
A steel brush and masking tape are also required and are not included.
Application summary
- Remove the wheels following the vehicle manufacturer's instructions. Brush away loose dirt and rust, then use the brake cleaner to remove grease, dust, brake fluid, oil and moisture.
- Mask brake hoses, bleed screws and surrounding rubber components. Ensure the surface is dry and stir the paint thoroughly.
- Apply a thin, even coat using the supplied brush. Allow 30 minutes between coats; two or three coats may be needed.
- Leave for a further 2 hours before refitting the wheels. Do not drive for a further 24 hours so the paint can harden.
Important safety information
- Read and follow all product label instructions before use. Wear suitable protective clothing, ensure good ventilation and do not inhale brake dust.
- Never apply to brake discs, brake pads or brake shoes. If contaminated with paint, these parts must be cleaned or replaced immediately.
- Do not use the brake cleaner as an engine degreaser.
- Do not use the paint on exhaust pipes, manifolds, turbos or engine components exceeding 220°C.
- Long-term performance on bare aluminium, stainless steel and other non-ferrous metal surfaces cannot be guaranteed.
Colour images are illustrative; the actual finish may vary.
